Counting Function; Percentum Mode - Gram D3 Serie Manual De Utilización

3. Press the
4. Press the
5. When you set the last digit, press the
mode.
Alarm mode setting
1. Select the desired alarm mode:
"-IN-" Alarm sounds when the weight is between high and low limits.
"-OUT-" Alarm sounds when the weight is out of limits range.
"-NO-" Alarm doesn´t sound.
2. Press the
3. To exit from setting mode press the

COUNTING FUNCTION

1. Press the
2. The display will show "SAP X" (X is the sample value)
3. Press the
200)
4. Press the
5. The display will show "LOAD-C".
6. Put on the weighing pan the number of pieces accordingly to the selected value
.
7. Press the

PERCENTUM MODE

1. Press the
2. There are two ways to do the sampling:
a) Put enough sample on the platform and then press
sampling.
b) Press
input the weight value.
3. When the sample weighed is less than 0.1% F.S, the display will show "-CSL-",
this means that the sample is not enough. You should re-sample, press the
key to re-sample and the
key to set the value of the active digit.
key to confirm the active digit value and go to the next digit.
to select the desired mode and the
key to enter the sample value for counting pieces.
key to choose the available sample values (10, 20, 50, 100 and
key to confirm the selected value.
key confirm and finish sampling.
key in percetum mode to view on display "LOAD-P".
key, the display will show "000000". Press
key to exit back to weighing mode.
key to confirm and to set the alarm
key to confirm.
key.
key to finish
and keys to
9