Before using Flash&Go™ for the first time, please read this User Manual in its entirety. Pay particular
attention to procedures for using and operating the device and after-use procedures.
We recommend you re-familiarize yourself with this User Manual before each use of Flash&Go™.
Flash&Go™ is a powerful electrical device. As such, it should be used with special
attention to safety. Please read all warnings and safety precautions before use, and
strictly follow them when using Flash&Go™
1. What is Flash&Go™?
Flash&Go™ is a light-based device
for long-term hair removal,
designed for home-use.
1.1 Silk'n Flash&Go™ device
description
The Silk'n Flash&Go™ HAIR REMOVAL
DEVICE has a TREATMENT SURFACE, a
CONTROL PAD and a PULSE TRIGGER.
1
Control pad
Central button
5
Pulse Trigger
Energy level indicator lights
2
6
3
Skin Color Sensor
Ready/Skin tone warning
7
4
Treatment Surface
indicator light
On the Hair Removal device, you can find
the Flash&Go™ Control Pad including a central Button which is also the Energy Level Setting Button, and
POWER, Energy Level, Ready, and System Warning Indicator Lights.
1.2 Package contents
Upon opening the Flash&Go™ package, you will find the following parts:
Flash&Go™ Hair Removal device with TREATMENT SURFACE
AC cord Adaptor
This User Manual
A beauty Case
2
1
7
2
5
4
3
6
2. Silk'n Flash&Go™ Intended Use
Silk'n Flash&Go™ is intended for removal of unwanted hair. Silk'n Flash&Go™ is also intended to effect long
term, or permanent hair reduction. The Flash&Go™ device is also intended for permanent reduction in hair
regrowth, defined as the long-term, stable reduction in the number of hairs regrowing when measured at 6, 9,
and 12 months after the completion of a treatment regime.
3. Safety with Flash&Go™
HPL™ technology in Flash&Go™ - Superior safety with lower energy level
Home Pulsed Light™ technology is able to achieve long-term hair removal results at a fraction of the
energy level used in other light-based hair removal equipment. The low energy used in Flash&Go™
6
reduces its potential to cause harm or complications, and contributes to your overall safety.
Flash&Go™ protects your eyes. The Flash&Go™ Hair Removal Device is intended for use below the
cheekbones but not around the eyes. HPL light can be harmful to the eyes even when not pointed directly at
them. To protect your eyes from such harm the Flash&Go™ Hair Removal Device has a built-in safety feature
for eye protection. It has been designed so that a light pulse cannot be emitted when the treatment surface
is facing open air. The Pulse Trigger is enabled only when the treatment surface is in full contact with the skin.
Flash&Go™ protects your skin. Flash&Go™ comes with a Skin Color Sensor enabling use only on lighter
skin complexions to ensure skin safety. Furthermore, the 0.9X3cm² Optical Lens through which pulses of
light are delivered is recessed inside the device' s treatment surface. This enables Flash&Go™ to protect your
skin by avoiding direct contact between the optical lens and the skin.
4. Contraindications
Flash&Go™ is not designed for everyone. Please read and consider the information in the following section before use.
For further information and personalized advice, you may also visit www.silkn.com or your local Flash&Go™ domain.
If you are unsure if Flash&Go™ is safe for you to use, please ask your doctor or dermatologist!
DO NOT USE Flash&Go™ on a naturally dark skin complexion!
Important Safety Information – Read Before Use!
3