Audio Out - Sony BRAVIA FW-85BZ35F Guia


USB 1/2,
• Connecting a large USB device may
interfere with other connected
devices beside it.
• When connecting a large USB device,
connect to the USB 1 port.

 AUDIO OUT

• Supports 3-pole stereo mini jack only.
• To listen to the Monitor's sound
through the connected equipment,
press HOME. Select [Settings] 
[Sound]  [Headphone/Audio out]
and then select the desired item.
 HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
•
< 12 mm
< 21 mm
• HDMI IN 2/3
To enjoy high quality 4K 50p/60p
contents, connect a Premium High
Speed HDMI cable to the HDMI IN 2/3
and set the [HDMI signal format] to
[Enhanced format].
For details of supported formats, refer
to the "Specifications" in Reference
Guide (page 16 - 18).
• HDMI IN 3 ARC (Audio Return
Channel)
Connect your audio system to the
HDMI IN 3 to route Monitor audio to
your audio system. An audio system
that supports HDMI ARC can send
video to the Monitor, and receive
audio from the Monitor via the same
HDMI cable. If your audio system
does not support HDMI ARC, an
additional connection with DIGITAL
AUDIO OUT (OPTICAL) is necessary.
4
US
USB 3
/
 REMOTE RS-232C
• Terminal for serial communication.
For details, refer to "RS-232C" on the
control functions (page 9).
RX
TX
GND
 HDMI 1 AUDIO IN
• If the device has a DVI jack, connect it
to HDMI IN 1 through a DVI - HDMI
adapter interface (not supplied), and
connect the device's audio out jack to
HDMI 1 AUDIO IN.
* When connecting mono equipment, connect to
the L (MONO) audio jack (socket).