Dust Bin
Lid Release
Levier de dégagement
du bac à poussière
Liberación de la tapa
del cubo de basura
Dust Bin
Emptying Door
Rabat du bac à
poussière
Botón soltar
puerta canasto
del polvo
Cleaning Cams
Came de nettoyage
Levas limpieza
Filter Supporter
Support du filtre
Soporte filtro
Filter Changing and Cleaning
Primary
Filter
Filtre principal
Filtro primario
Door latch
Loquet de
porte
Picaporte
puerta
Check primary filter frequently and
clean when dirty.
To remove primary filter, open dust
bin lid assembly as outlined in the
DUST BIN CLEANING section.
While holding primary filter over a
trash container grasp filter, rotate
counter-clockwise and remove from
filter support.
Clean primary filter by gently tapping
over a trash container. Tap on several
sides to ensure best cleaning.
Rinse with water only as needed, do
not use any detergent or soap.
Allow the filter to dry for 24 hours
before putting it back into the
vacuum cleaner.
When cleaning the filter no longer
restores vacuum cleaner suction to
full power you need to replace the
filter.
TO REPLACE PRIMARY FILTER
With slot side on filter towards the
dust bin slide cleaning cam inside
opening, rotate filter clockwise until
slots lock onto tabs in dust bin.
Note: Under normal use and care, your
filter can be expected to last up to 5
years.
After the dust bin is empty of debris,
firmly close the door. Make sure you
hear a "click" sound to indicate that
the door is fully latched.
Place dust bin back into vacuum
cleaner by inserting the bottom first
and tilting back.
- 34 -