Removing And Installing Lower Plate - Panasonic MC-V7710 Instrucciones De Operación

WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Latch
Taquets
Broche
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Lower Plate
Plaque inféreure
Base inferior
Latch
Taquets
Broche
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Electrical Shock or Personal Injury Hazard

Removing and Installing Lower Plate

Locking
Tab
Loquet de
sûreté
Guía de
cierre
Fig. 1
Fig. 2
Tabs
Languettes
Lengüetas
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Fig. 3
Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
Always place paper under nozzle
whenever lower plate is removed to
protect floor.
Place body in upright position and
turn vacuum cleaner over to expose
lower plate.
Release lower plate by pressing two
(2) latches and two (2) locking tabs
inward as shown. (Fig. 1)
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing. (Fig. 2)
Rotate lower plate until locking tabs
snap into place then push the two (2)
latches outward. (Fig. 3)
- 42 -