Battery Replacement; Powering Off - EDTM WINDOW ENERGY PROFILER Manual De Instrucciones

BATTERY REPLACEMENT

The WP4500 is powered by a 9 volt alka-
line battery. When the battery voltage is
getting too low to operate the meter, the
low battery indicator will turn on. The in-
strument can still be used at this point,
however it is recommended that the bat-
tery be replaced soon. Alkaline batteries
are recommended for this product.

POWERING OFF

To shut off the WP4500, push and hold the
ON/OFF switch for a couple of seconds.
The WP4500 instrument is also equipped
with an automatic power-off feature to help
extend the life of your battery. The instru-
ment will automatically shut off after ap-
proximately five minutes of operation. This
is helpful if the user forgets to turn the in-
strument off or if the meter is accidentally
turned on.
DIMENSIONS
2
WARRANTY
The manufacturer warrants all models of the
WP4500 to be free from defects in material and
workmanship under normal use and service as
specified within the operator's manual. The
manufacturer shall repair or replace the unit
within twelve (12) months from the original date
of shipment after the unit is returned to the
manufacturer's factory, prepaid by the user, and
the unit is disclosed to the manufacturer's sat-
isfaction, to be thus defective. This warranty
shall not apply to any unit that has been repaired
or altered other than by the manufacturer. The
aforementioned provisions do not extend the
original warranty period of the unit which has
been repaired or replaced by the manufacturer.
Batteries are not covered by warranty.
The manufacturer assumes no liability for the
consequential damages of any kind through the
use or misuse of the WP4500 product by the
purchaser or others. No other obligations or li-
abilities are expressed or implied. All damage
or liability claims will be limited to an amount
equal to the sale price of the WP4500, as es-
tablished by the manufacturer.