Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION ______________________________
2
Press the On/Off switch
switch on the appliance.
– The appliance starts.
3
Place the cutting head
person's hair.
4
Move the cutting head
the direction of hair growth. Apply
only a slight pressure when cutting
with slow, gentle movements.
5
After use, switch off the appliance
with the On/Off switch
Useful tips
Hold the appliance with a re-
7
laxed and comfortable grip.
Always cut against the natural
7
direction of the hair.
As you cut, take a break at regu-
7
lar intervals. You can always
make a correction, but not once
the hair has been cut.
Only cut a small amount the first
7
time you use it. This is the only
way to get used to the variable
positions.
Keep combing the hair. Only
7
look for hair which is too long
and comb out clippings.
to
Beard trimming
B
1
on the
A
2
against
A
3
4
.
B
5
Notes
7
7
Adjust the trimming length by
referring to the "Preparation"
section.
Press the On/Off switch
switch on the appliance.
– The appliance starts.
Place the cutting head
beard.
Move the cutting head
the direction of hair growth. Apply
only a slight pressure when cutting
with slow, gentle movements.
After use, switch off the appliance
with the On/Off switch
If the appliance is blocked by
thick hair while you are using
it, switch it off. If running it from
the mains, unplug the socket.
Remove the adjustable comb
and clean the cutting head with
the brush supplied. Clean the
appliance as described in the
"Cleaning and Care" section.
For trimming contours, remove
the adjustable comb 1
. Use the appliance without
G
the combs (cutting length is 1.5
mm).
to
B
on the
A
against
A
.
B
or 2
D
ENGLISH
25
Publicidad
