Remote Control Functions - Twin Star 23E05-R Manual De Operacion Del Propietario

CONTROL FUNCTIONS
MAIN POWER - The Main Power switch supplies
power to all of the functions of the fireplace.
WARNING: During any service of this appliance, the
power to the unit must be turned off. First turn the
main power switch to the "OFF" position. Then
remove the electrical plug from the wall outlet.
HEATER - The Heater switch turns the heater element
and blower motor on and off. Heater should always be
turned on and off by this control only.
DOWN LIGHT (28E05 & 33E05 ONLY) -
The Down Light switch turns on the down lights that
illuminate inside of the firebox.
TEMPERATURE - The Temperature control knob
regulates the temperature level of the heater. Turning
the knob clockwise will increase the heat output. The
further the knob is rotated clockwise, the higher the set
point temperature. Turning the knob counter-clock-
wise will lower the set point temperature.
3 Switch Control Panel (models 28E05-R and 33E05-R)
O P E R AT I N G I N S T R U C T I O N S
2 Switch Control Panel (models 23E05-R)
FLAME BRIGHTNESS - The Flame Brightness
control knob adjusts the flame brightness. Turning the
knob to the left (counter-clockwise) dims the lights and
flame effect. Turning the knob to the right brightens the
lights and flame effect.

REMOTE CONTROL FUNCTIONS

1.) Install the 2- AAA batteries that are packages with
the remote transmitter.
2.) Open the control panel door and turn the brightness
knob clockwise until it stops
To turn your Fireplace Insert On/Off from the
Control Panel-
3.) Press the power button on the control panel once to
turn power on, press once more to turn power off.
To turn your Fireplace Insert On/Off with the
Remote Control-
4.) Aim the remote transmitter at the front of the insert
and press the button on the transmitter once to
turn the power on, press it once more to turn the
power off.
All other functions must be operated from the Control Panel.
E-7