AKO PROPlus 15640 Guía Rápida página 24

Parameters
........5 seg.
SET
REFRIGERATION control (Compressor)
Set Point
Sensor 1 differential
Calibration of probe 1
Set point upper limit (it cannot be set above this value)
Set point lower limit (it cannot be set below this value)
Compressor protection
OFF/ON (From the last disconnection)
ON (to the connection)
Protection delay time
Compressor ON fault s1
(If it is 0, it will always be stopped)
Compressor OFF fault s1
(If it is 0, it will always be running)
Stop when opening door?
(It requires a digital input configured as door contact)
DEFROST control
Defrost type: Electrical heater
Defrost count: Frequency
Defrost frequency (Time between two starts)
Defrost duration
Defrost message:
Message duration (Time added at the end of the defrost)
Defrost final temperature
Defrost at Start-up
Defrost delay at Start-up
Signals end defrost time
Drip time
SET
Description
Description
Reverse cycle
Compressor sum
Current temperature
Defrost Start temperat
DEFROST message
SET
Real time clock
Units Min Def Max.
(ºC/ºF) –40 0.0 320
(ºC/ºF) 0.1 1.0 20.0
(ºC/ºF) –20.0 0.0 20.0
(ºC/ºF) B.I. 99.9 320
(ºC/ºF) –40.0 –40.0 B.S.
OFF/ON
(min.) 0 0 255
(min.) 0 10 255
(min.) 0 5 255
No
Units Min Def Max.
Res
Fre.
(h.) 0 6 120
(min.)
0 30 255
DEF
(min.) 0 5 255
(ºC/ºF) –40.0 8.0 99.9
No
(min.)
0 0 255
No
(min.) 0 1 255