Midnight Light; Settings - Philips HF3650 Manual Del Usuario

English
12

Midnight light

Settings

Time
Press the bedside lamp button on the display to switch on the bedside
lamp.
Note: You can increase and decrease the brightness intensity. You can select
a brightness between 1 (low) to 25 (high). The default brightness setting is 18.
To switch it off press the cross button in the menu.
Tip: When the light is on, you can also turn off the light with a single tap on
top of the Sleep & Wake-Up Light. All active programs will stop. Set alarms
are still active.
If you wake up during the night, you can tap the top of the appliance to
activate a dim light. This dim, subtle orange light provides you with just
enough light to find your way in the dark. Switch off the Midnight light by
tapping the top of the appliance again.
Note: The Midnight light cannot be activated directly when the main light is
already on. In that case, first tap the top of the appliance to deactivate the
main light. Then tap again to activate the Midnight light.
In this menu, you can adjust the clock time, the audio feedback and the
display brightness of the appliance.
Note: Press and hold the settings button for 5 seconds to open a new menu,
in which you can select DEMO mode (accelerated wake-up curve) or
VERSION (firmware version of the appliance).
You can change the time and switch between a 12-hour clock (AM/PM) and
a 24-hour clock by pressing on the toggle button (12/24).