Cleaning Solution; Requirments - Orbio 100-Tb Manual De Funcionamiento Y Lista De Componentes

CLEANING SOLUTION

The Orbio Multi−Prupose Cleaner will clean most
soiled or dirty surfaces (nylon and polyester
carpeting, glass, metal, ceramic, laminate, painted
surfaces, and other non-porous surfaces), but is
not recommended for cleaning heavy petroleum
based oils and greases. The Orbio Multi−Prupose
Cleaner also does not kill bacteria, so it must not
be used to sanitize or disinfect surfaces.
Note: Always check carpet manufacturer
specification for color stability and shrinkage
properties before using a water-based solution on
carpeting.
Do not dilute the Orbio Multi−Prupose Cleaner
with water. Water will diminish the cleaning
effectiveness. The Orbio Multi−Prupose Cleaner
is ready to use after dispensing.
FOR SAFETY: Do not mix Orbio
Multi−Prupose Cleaner with
conventional cleaning chemicals. Do
not drink. Refer to MSDS(Material
Safety Data Sheet) for additional safety
information and precautions.
The Orbio Multi−Prupose Cleaner does not pose
a skin or eye hazard. The concentration of
sodium hydroxide in the cleaning solution is
approximately 0.001%. For good hygiene
practice, it is recommended that personnel wear
appropriate protective gear when cleaning.
The Orbio Multi−Prupose Cleaner will remain
effective for 30 days or more when stored in a
clean sealed container. Test the cleaning solution
to verify the pH level is at the correct level if the
solution has been stored for longer than 30 days.
Refer to TESTING THE CLEANING SOLUTION
in MAINTENANCE of your 5000-Sc manual for
additional testing information.
NOTE: The temperature for the room / location
where the Orbio Multi−Prupose Cleaner is stored
should be between 50°-110°F (10° to 43°C).

REQUIRMENTS

120 VAC outlet for charger in a dry location.
100−Tb/200−Tb DM20016 (7−2012)
OPERATION EN
5