Setting The Meter And Deleting The Memory - DDI PRODIGY 51720 Manual Del Usuario

P R O D I G Y
Setting the Meter and Deleting
the Memory
Your meter comes with the time, date, unit of
measurement and unit of temperature preset.
However if you need to change the time, or if
you replace the batteries, you may need to
enter the set-up mode.
To set the time, you must first enter the
set-up mode.
Start with the meter off. Then press the Set
button located in the battery compartment.
The meter is now in the set-up mode.
Step 1 – Set the Year
The year appears first, with the number flash-
ing. Press and release the M button to
advance one year. To move faster, hold the M
button down. With the correct year on the
display, press the Set button and the date
will appear on the display with the month
segment flashing.
Step 2 – Set the Month
Press and release the M button until the
correct month appears. To move faster, hold
the M button down. With the correct month
on the display, press the Set button and the
day segment will start flashing.
30
Diagnostic Devices, Inc.
Blood Glucose Monitoring Systems – User's Manual
®
www.prodigymeter.com
Figure 35
Figure 36
1- 800-243-2636