PowerWalker 1000 LCD Manual De Instrucciones página 107

12: Battery total AH setting
Интерфейс
RU
13: Charger maximum current setting
Интерфейс
14: Charger Boost voltage setting
Интерфейс
15: Charger Float voltage setting
Интерфейс

00: Выйдите из настроек
999: Если значение равно "999", Настройка во резервное
время отключен. настройка во резервное время отключен.
Настройка
Parameter 3: Set up the battery total AH of the UPS.
7-999: setting the battery total capacity from 7-999 in AH.
Please set the correct battery total capacity if external battery
bank is connected.
Настройка
Parameter 3: Set up the charger maximum current.
1/2/4/6/8: setting the charger maximum current 1/2/4/6/8*
in Ampere. (Default: 8A)
*Note: This setting is only available for super charger.
Настройка
Parameter 3: Set up the charger boost voltage.
2.25-2.40: setting the charger boost voltage from 2.25 V/cell to
2.40V/cell. (Default: 2.36V/cell)
Настройка
Parameter 3: Set up the charger float voltage.
2.20-2.33: setting the charger float voltage from 2.20 V/cell to
2.33V/cell. (Default: 2.28V/cell)
14