Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
-
THE HEATER IS SOLELY INTENDED FOR INDOOR USE AND NOT
FOR OUTDOOR OR COMMERCIAL USE.
-
NEVER USE THE HEATER NEAR TO FLAMMABLE GASES OR OTHER
SUBSTANCES SUCH AS SOLVENTS, VARNISH, PAINT OR GLUE.
PARTS OF THE HEATER MAY BECOME VERY HOT AND/OR EMIT
SPARKS.
-
KEEP FLAMMABLE MATERIALS AT LEAST 1 M FROM THE HEATER.
AVOID BURNS AND DO NOT ALLOW EXPOSED SKIN TO HAVE
CONTACT WITH HOT SURFACES.
-
IF THE POWER CORD IS DAMAGED, THIS SHOULD BE REPLACED
BY THE MANUFACTURER, A MAINTENANCE TECHNICIAN OR A
SIMILARLY QUALIFIED PERSON TO AVOID RISKS.
-
NEVER TOUCH THE HEATER WITH WET HANDS.
-
CHECK THE HEATER FOR ANY OBSTRUCTIONS. IF YOU FIND
OBSTRUCTIONS, SWITCH OFF THE HEATER USING THE ON-OFF
SWITCH ON THE CONTROL PANEL. ALLOW THE HEATER TO FULLY
COOL DOWN AND REMOVE THE OBSTRUCTION. WAIT AT LEAST
10 MINUTES BEFORE YOU SWITCH ON THE HEATER AGAIN AS
DESCRIBED IN THE USER GUIDE.
THIS PRODUCT IS SOLELY SUITABLE FOR WELL INSULATED PLACES
OR OCCASIONAL USE.
EN
Publicidad
Tabla de contenido
