Warnings - Components - Beko CWB 7441 X Manual Del Usuario

2

Warnings - Components

Warnings
This appliance has been designed
for use as either an EXTRACTION
(ducting to the outside) or
RECIRCULATION (filtering) hood.
The measurements contained on
the drawings in this booklet re-
fer to two models of cooker hood.
Therefore, it is essential that you
refer to the correct drawing when
taking measurements for installa-
tion.
The minimum distance between
•
the cooking surface and the metal
grease filters on the underside of
the hood must be 650mm.
This cooker hood must be installed
•
in accordance with the installation
instructions and all requirements
must be adhered to.
If the room where the cooker
•
hood is to be used contains a
fuel burning appliance such as a
central heating boiler then its flue
must be of the room sealed or
balance flue type.
If other types of flue or appliances
•
are fitted ensure that there is an
adequate supply of air to the
room.
Hood / User Manual
When the range hood and
•
appliance supplied with energy
other than electricity are
simultaneously in operation, the
negative pressure in the room
must not exceed 4 Pa (4x10-5
bar).
The ducting system for this
•
appliance must not be connected
to any ventilation system which is
being used for any other purpose.
The ducting system for this
•
appliance must not be connected
to any existing ventilation system
which is being used for any other
purpose.
Do not leave naked flames or carry
•
out flambè cooking under this
cooker hood.
This appliance is not intended
•
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the appliance
by a person responsible for their
safety.
Children should be supervised to
•
ensure that they do not play with
the appliance
9 / EN