Video Settings; Ports & Protocols; Security - Belkin ENTERPRISE Serie Guía De Instalación Rápida

P74238ea_F1DE101G-man.qxd 28-04-2003
USING YOUR RIPC

Video Settings

The RIPC features a panel to set up the
following video options, available in the
Remote Access Options menu.
Note: Brightness and contrast controls
affect all modes and KVM ports globally;
the other settings are changed specifically
for each mode on each KVM port.
Horizontal Offset: Use the left and right buttons to move the picture in a
horizontal direction while this option is selected.
Vertical Offset: Use the left and right buttons to move the picture in a
vertical direction while this option is selected.
Reset this Mode: Resets mode-specific settings to their factory defaults.
Reset all Modes: Resets all settings to their factory defaults.
Save Changes: Saves changes permanently.
Undo Changes: Restores last settings.
09:33 Page 22
Video Settings Panel
22

SECURITY

Ports & Protocols
Force HTTPS
If this option is enabled, access to the Web front-end is only possible using an
HTTPS connection. The RIPC won't work on the HTTP port for incoming
connections.
HTTPS Port
Port number at which the HTTPS server is set to. If left unused or open, the
default value will be used.
HTTP Port
Port number at which the RIPC's HTTP server is set to. If left unused or open,
the default value will be used.
Telnet Port
Port number at which the RIPC's Telnet server is set to. If left unused or open,
the default value will be used.
Ports & Protocols Menu
23