Appliance-Specific Safety Instructions For Jigsaws; Original Accessories/Auxiliary Equipment - Parkside PSTD 800 B2 Traducción Del Manual De Instrucciones Original

Appliance-specific safety instructions
for jigsaws
■
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a „live" wire may make
exposed metal parts of the power tool „live"
and could give the operator an electric shock.
■ Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece by
hand or against your body leaves it un- stable
and may lead to loss of control.
■ Keep your hands away from the sawing area.
Do not reach underneath the workpiece. Con-
tact with the saw blade may result in injury.
■ Keep your hands away from the stroke
rod and the quick-release chuck. There is
a risk of crushing if contact is made with these
components.
■ Always switch on the power tool before applying
it to the workpiece. Otherwise, there is a risk of
a kickback.
■ When sawing, ensure that the footplate
placed against the workpiece.
■ After completing your work, switch the power
tool off and do not pull the saw blade
the cut until it has come to a complete standstill.
This prevents kickbacks, and allows you to put
the tool down safely.
■ Only use undamaged saw blades that are
in perfect working order. Bent and blunt saw
blades can break or may cause a kickback.
■ Do not try and slow the saw blade
after switching off by applying lateral pressure.
The saw blade might be damaged, break or
cause a kickback.
■ Secure the workpiece. Use clamps/a vice to
hold the workpiece firmly. This is safer than
simply holding it in your hand.
■ Always route the power cable towards the rear,
away from the appliance.
■ Never work on moistened materials or damp
surfaces.
PSTD 800 B2
■ Risks from dust! When working for extended
periods on wood and, in particular, materials
that produce dusts that are hazardous to health,
connect the appliance to an appropriate dust
extraction device.
■ Wear a dust mask!
■ Ensure there is sufficient ventilation.
WARNING! Protect yourself from
P max.: < 1 mW • : 650 nm
• EN 60825-1:2014
Never look directly into the laser beam or into the
laser discharge opening
WARNING!
► Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.) can
cause eye injuries.
► Caution! If operating and adjustment equip-
is
ment or procedures other than those specified
here are used, this may result in hazardous
radiation exposure.
out of
■ Never aim the laser beam at reflective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
Original accessories/auxiliary
equipment
■ Only use the accessories and additional
down
equipment that are specified in the operat-
ing instructions and compatible with the
appliance.
laser radiation!
LASER
2
from which it emerges.
GB │ MT │
41 ■