Preset Energy-Saving Schedules; Setting The Clock - Honeywell RCT8200 Manual Del Usuario

Clock setting
1. To set the current time display,
press CLOCK, then press
to adjust the time. Press and hold
or to advance the time more
s t
quickly.
2. Press DONE to save & exit (or press
CANCEL to exit without changing
the time).
NOTE: The real-time clock should
never require adjustment since it
automatically updates for daylight
savings time, and stores all date/time
information.
NOTE: To change the current week
day display, see see System Setup in
your Installation Guide.
Program Schedule
You can program four time periods each day, with different settings for
weekdays and weekends. We recommend the pre-set settings (shown in the
table below), since they can reduce your heating/cooling expenses.
Wake - Set to the time you
awaken and the temperature
you want during the morning,
until you leave for the day.
Leave - Set to the time
you leave home and the
temperature you want while you
are away (usually an energy-
saving level).
Return - Set to the time
you return home and the
temperature you want during
the evening, until bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight
(usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.
or
s t
Wake
(6:00 am)
Leave
(8:00 am)
Return
(6:00 pm)
Sleep
(10:00 pm)
14
WED
70
FAN
Inside
AUTO
6:01
AM
WED
FAN 70
Inside
SCHED HOLD CLOCK
AUTO
6:02
AM
DONE
Heat
70 °
62 °
70 °
62 °
70
Set To
70
SCREEN MORE
Set To
M28375
CANCEL
M28376
Cool
75 °
83 °
75 °
78 °