Adjusting Program Schedules; Overriding Schedules Temporarily - Honeywell RCT8200 Manual Del Usuario

To adjust program schedules
1. Press SCHED, then EDIT.
2. Press day buttons (MON-SUN) to select
day(s).
3. Press or
s t
selected day(s).
4. Press or
s t
temperature for this time period.
5. Press other time periods (LEAVE, RETURN,
SLEEP) to set time and temperatures for
each.
6. Press DONE to save & exit (or press
CANCEL to exit without saving changes).
NOTE: You can press CANCEL PERIOD to
eliminate any unwanted time period.
Program schedule override (temporary)
Press or to immediately
s t
adjust the temperature. This will
temporarily override the temperature
setting for the current time period.
The new temperature will be
maintained only until the time you
set. When the timer expires, the
program schedule will resume and
set the temperature to the level
you've programmed for the current
time period.
To cancel the temporary setting at
any time, press CANCEL (or SCHED).
The program schedule will resume.
to set Wake time for
to set Heat and Cool
70
Inside
AUTO
FAN 70
Inside
AUTO
6:00
SCHED
6:00
DONE EDIT
MON TUE
OK TO PICK MULTIPLE DAYS
6:00
DONE
WED
FAN 70
Inside
AUTO
SYSTEM
Hold Temperature
HEAT
Until
8:00
SCHED HOLD
15
70
Set To
WED
Following
Schedule
70
Set To
AM
Following
Schedule
HOLD CLOCK SCREEN MORE
AM
WAKE LEAVE RETURN SLEEP
WED THU FRI SAT
70
CANCEL
PERIOD
78
AM
WAKE LEAVE RETURN SLEEP
73
Set To
Heat On
AM
CLOCK SCREEN MORE
M28379
CANCEL
M28380
SUN
HEAT
COOL
CANCEL
M28381
CANCEL
M28382