Microphotography - Optika B-510 Serie Manual De Instrucciones

11. Microphotography

Installing the C-mount adapter
1. Loosen the clamping screw ① on the
trinocular port and remove the dust cap
②. (Fig.27)
2. Screw the C-mount adapter ③ to the
camera ④ and insert the round dovetail
of the C-mount into the empty hole of the
trinocular port, then tighten the clamping
screw ①. (Fig.28)
Use of Reflex camera
1. Insert the Reflex adapter ① into the relay
tube to the microscope ②.
2. Screw the "T2" ring ③ (not provided) to
the reflex adapter.
3. Connect the Reflex camera ④ to the "T2"
just installed (Fig. 29).
● "T2" ring is not privided along with the
microscope, but is commercialy available.
● While shhoting dark specimens, darken
eyepieces and viewfinder with a dark cloth
to miminize the diffused light.
● To calculate the magnification of the
camera: objective magnification * camera
magnification * lens magnification.
► If using an SLR
movement may cause the camera to
vibrate.
We suggest lifting the mirror, using
long exposure times and a remote
cord.
camera, mirror
④
②
①
Page 54
② ②
① ①
④
③
③
①
Fig.27 Fig.27
Fig.28
②
Fig.29