Tools And Materials Required; Remove The Packaging - Monogram ZV830 Instrucciones De Instalación

TOOLS AND MATERIALS REQUIRED

)
(NOT SUPPLIED
Tape measure
Knife
Spirit level
Wire cutter/stripper
Wire nuts
Electric drill with 1/8" and 3/8" bits
Phillips and flat blade screwdrivers
Hammer
Pliers
Safety glasses
Aluminized duct tape
Tape to mount template
Gloves to protect against sharp edges
120V 60Hz. 15 or 20 Amp, 2 wire with
ground Properly grounded branch circuit
Strain relief for junction cover
8" round metal duct, length to suit
installation
Saw, jig saw or reciprocating saw
Tin snips

REMOVE THE PACKAGING

CAUTION:
Wear gloves to protect against
sharp edges.
• Remove duct covers.
• Remove the parts box and other pieces. Locate
the literature package.
• Remove and properly discard the protective plastic
wrapping and other packaging materials.
Installation Preparation
Measuring tape
Pliers
Aluminized
duct tape
12" long
Strain relief
Phillips
head
screwdriver
Wire nuts
Masking tape
Tin snips
6
Spirit level
Electric drill
with 1/8" and
3/8" Bits
Safety glasses
Saw, jig saw or
reciprocating
saw
Gloves
Knife
Wire
cutter/stripper
Hammer
Flat blade
screwdriver
8" round metal duct,
length to suit
installation