Priority Instructions; Description And Applications Of The Equipment - Tractel RT05 50-100 Modo De Empleo

GB
Always concerned to improve the quality of its products, TRACTEL SOLUTIONS S.A.S
reserves the right to modify without notice the specifications of the equipment described in
this manual.
This manual outlines all necessary instructions for the safe and the correct operation of the
TOPAL clamps.
For safety's sake and efficiency of the equipment, you must become familiar with these
instructions and adhere to them before any use of the equipment.
The clamp can be used only by skilled and entitled personnel
 Never transport people using this equipment or its accessories.
 Never exceed the working load limit WLL (see engraving).
 A minimum load of 5% of the WLL must be respected
 Never weld on the equipment or alter it.
 Never use the equipment for any lifting other than the type it is designed for.
 Never go under the load.
 When laying down a load, the object must be stable before opening the clamp.
 Regularly check the correct condition of the equipment (see Storage &
Maintenance paragraph).
 Lifting and turning operations can only be done when the environment is free of
obstacles
 Only TRACTEL SOLUTIONS spare parts must be used.

DESCRIPTION AND APPLICATIONS OF THE EQUIPMENT

TI : Accessory to transport horizontal pipes and lay them into trenches.
Also designed to transport bars and tubes of any material.
o Semi-automatic model: manual grab action and automatic locking of the grab in the
open position.
o Automatic model: the grab and laying down operation is performed without any
manual operation from the operator on the grab.
RT : Handling accessory to horizontally lift round bars, tubes, square and small sections in
bundles or individually.
These grabs are designed to be used in pairs with a lifting beam.
M 6111 rev 3 – 09/2011

PRIORITY INSTRUCTIONS

5