Storage And Maintenance - Tractel RT05 50-100 Modo De Empleo

 Please consult us for lifting pieces with an other temperature than the ambient
temperature
 Working temperature : -20° to +90°C.
COMPULSARY INSPECTIONS AND CHECKS
Maintenance inspections and operations must be performed by qualified and entitled
 Check on start up (or starting back up): in compliance with the national regulations.
 Compulsory periodical check in compliance with the national regulations. Recommended
at least every 12 months by TRACTEL SOLUTIONS SAS.
 A thorough examination paying particular attention to any alteration of parts due to
an impact, corrosion, cracking or deformation must be conducted a minimum of
twice a year, every month in the case of heavy-duty use in an aggressive
atmosphere.
 TRACTEL SOLUTIONS is at your disposal in order to conduct any regulatory check.
Maintenance inspections and operations must be performed by qualified and entitled
 Regularly check the equipment is in perfect working order (before every use), in particular
the semi-automatic system and the pivoting pads.
 Perform visual inspection before every use.
 Any part with a defect must be replaced by a TRACTEL SOLUTIONS part.
 The grab has to be stored in an safe place, at ambient temperature
 During the storage, the grab has to be in a stable position without risks of tipping over. On
request, Tractel Solutions supplies appropriate storage supports
 Any overloaded equipment must be immediately withdrawn from use.
M 6111 rev 3 – 09/2011
persons.

STORAGE AND MAINTENANCE

persons.
8