Panel Description - Palmer PETIMEP Manual Del Usuario

PANEL DESCRIPTION

FRONT
1
RATE
This controls the delay time up to a maximum of 700ms when fully
clockwise.
2
REPEAT
This controls the number of delay repeats from a single slapback to
infinite oscillation when fully clockwise.
3
TONE
This controls the tone of the delayed signal. Clockwise rotation
adds brightness, counterclockwise rotation increases treble roll-
off adding natural warmth. In center position the delayed signal
remains unaffected.
4
MIX
This controls the wet/dry ratio of the original and delayed signals
from delay only (fully counterclockwise) to original signal only
(fully clockwise). In center position equal amounts of the original
and delayed signals are fed to the output.
5
THRESHOLD
This controls the amount of compression from zero (fully counter-
clockwise) to maximum (fully clockwise).
6
LEVEL
This controls the output level of the pedal from zero (fully coun-
terclockwise) to unity (center position) to a massive boost (fully
clockwise).
5