Panel Description - Palmer PEFLA Flanger Manual De Usuario

pANEL DESCRIpTION

1
RATE CONTROL
Adjusts the speed of the modulation. Turning this control clockwise
increases the speed.
2
DEpTh CONTROL
Adjusts the amount of modulation. Turning it clockwise increases
the depth of modulation.
3
MIx CONTROL
Adjusts the amount of effect mixed in with the input signal. Turn-
ing it clockwise increases the level of effect mixed with the input
signal.
4
LED
When lit the pedal is switched on. Also serves as a battery level
indicator.
5
ON/OFF SwITCh
This switch determines whether the pedal is "active" or "bypassed".
When "active" the red LED will be lit. When "bypased" the LED will
not be lit.
6
IN
Use a quality instrument cable with 1/4" jacks to plug your guitar
into this jack socket.
7
OUT
Use a quality instrument cable with 1/4" jacks to connect this out-
put to the input of your guitar amplifier, or the next stomp box in
the signal chain.
10