Panel Description - Palmer PEDIST Manual De Usuario

PANEL DESCRIPTION

1
FILTER CONTROL
This allows you to shape your overall sound. Turn it up for a
brighter sound and down for darker tones.
2
DISTORTION CONTROL
This adjusts the amount of signal distortion.
3
VOLUME CONTROL
This adjusts the output level of the distorted sound.
4
LED
When lit the pedal is switched on. Also serves as a battery level
indicator.
5
ON/OFF SWITCH
This determines whether the pedal is active or bypassed.
6
IN
Use a quality instrument cable with 1/4" jacks to plug your guitar
into this jack socket.
7
OUT
Use a quality instrument cable with 1/4" jacks to connect this out-
put to the input of your guitar amplifier, or the next stomp box in
the signal chain.
8
9V DC INPUT
Connect an optional 9-Volt DC power supply to this socket.For details
please refer to "POWER REQUIREMENTS".
10