Seting The Size Of The Cigarette Plug; When Replacing Cigarette Plug Fuse; Installation Position; Precautions For Installing Unit - Pioneer NavGate HUD SPX-HUD01 Guía De Instalación E Inicio Rápido

Section
06 Connections
07
Notes
! The LED indicator on the cigarette plug lights
when the power is on, and turns off when the
unit is turned off.
If the LED indicator does not turn off when
the vehicle engine is turned off, disconnect
the power cable from the cigarette socket on
the vehicle. Failure to do so will drain the ve-
hicle battery.
! For details on connecting an iPhone or
Android device, refer to Setting your iPhone
or Android device on page 17.
Seting the size of the
cigarette plug
Set the cigarette plug size to L (large) or S
(small) according to the size of the cigarette
socket on the vehicle.
1
1 Plug size switch
10
Engb
When replacing cigarette
plug fuse
1 Turn the plug counterclockwise to loosen
it.
1
1 Fuse (3 A)
2 Replace the fuse with a new one with
the same capacity.

Installation position

Precautions for installing unit

WARNING
! Use the supplied screws and install the unit
as specified. Use of screws other than the
supplied ones may cause damage to the
unit.
! Secure the unit to the sun visor firmly using
the supplied screws. Failure to do so may
cause the unit to fall during driving, hitting a
head and causing an injury.
! Read this manual fully and carefully, and in-
stall the unit correctly to abide by the safety
standards.

Specified installation position

CAUTION
Install the unit in the specified installation posi-
tion to provide the driver with a safe field of vi-
sion and ensure the unit can perform its
required functions. Installing the unit in a posi-
tion other than the specified one may not meet
the safety standards for road trucking vehicles,
and the vehicle may fail a safety inspection, for
example, due to a maintenance error.
1
2
1 Main unit
2 Power cable