Publicidad
Idiomas disponibles
Idiomas disponibles
Number
Description
1
Juice container
2
Speed level switch
3
Base unit/motor housing
4
Pulp container (waste container)
5
Locking latch
6
Spout with drip-stop function
7
Drip tray
8
Strainer
9
Transparent lid
10
Plunger
Note: When assembling, please ensure that the correct sequence (starting from 1
to 9) is followed, as shown in Figure 1.
4. Usage
Take the appliance out of the package and remove all the packaging material. Place
it on a flat and firm surface.
• Connect the plug to a properly installed socket.
• Place the juice container (1) under the juice spout with a drip stop function (6).
• Push the juice spout (6) up to use the drip stop function (e.g., when changing
the juice container).
• Close the locking latch (5).
• Switch on the appliance using the speed level switch (2). You have two speeds
to choose from. Choose level 1 for a slow juice extraction and level 2 for a fast
juice extraction.
• Take the desired fruit or vegetable and place it at the top in the opening of the lid
(9) and press it lightly with the plunger (10).
Caution! You can run the appliance for about 1 minute. Then please wait for 1
minute. This process can be repeated up to three times. Subsequently, allow the
juicer to cool down for 15 minutes.
English
23
Publicidad
