Removing The Top Cover; Cea Specifications - Orion Car Audio HCCA25001 Manual De Usuario

REMOVING THE TOP COVER

Top Cover
1. Insert key into lock.
2. Turn the key counterclockwise.
3. Slide the top cover away from the key while the key is still turned.
The cover only needs to slide approximately 0.25" before it can
be lifted up and removed from the amplifier.
NOTE: When installing cover, line up the pins on the bottom side of
the cover with the holes in the top of the amplifier. Slide toward the
power connectors. When the top cover shuts, it automatically locks
and does not require the key to complete.
NOTE: The top cover plate is designed to be reversible however the
LED color orientation will also appear changed when the cover is
reversed (see Amplifier Visual Troubleshooting section).
© 2009 Directed Electronics. All rights reserved.

CEA SPECIFICATIONS

Figure 4
HCCA25001
Figura 4
Abbildung 4
Lock
Key
HCCA50001
Power Output: 750 Watts RMS x 1 at 4 ohms and
< 1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt
into 4 ohms)
Additional Power Output: 2500 Watts RMS x 1
at 1 ohm at 14.4 Supply<1% THD+N
Power Output: 1500 Watts RMS x 1 at 4 ohms
and < 1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt
into 4 ohms)
Additional Power Output: 5000 Watts RMS x 1
at 1 ohm at 14.4 Supply<1% THD+N
5