Certification - Federal Signal Global Serie Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions
• Brass inserts have the potential to store charge when they are not
plugged. Consideration should be taken to prevent these from
becoming a sparking hazard.
• The lens guard has the potential to store charge. Consideration
should be taken to prevent this from becoming a sparking hazard.
• Establish a procedure to routinely check the beacon system for
proper activation and operation.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.

Certification

Certificate Nos.:
Protection:
Standards:
Specific Conditions of Use:
1. The Modular Visual LED has external non-metallic surfaces
which may provided a potential electrostatic charging hazard.
See the manufacturer's instructions for further information.
2. The Modular Visual LED has metallic components in the non-
metallic walls of the enclosure which can store electrical charge
and therefore may provide a potential electrostatic charging
hazard. The metallic brass inserts have a capacitance of 14 pF.
The metallic guard has a capacitance of 18 pF. See the
manufacturer's instructions for further information.
6
ATEX Cert No.: Baseefa15ATEX0153X
IECEx Cert No.: IECEx BAS 15.0102X
ATEX coding:
II 2 GD Ex db op is IIC T6 Gb or II 2 GD Ex db e op is IIC T6 Gb
Ex op is tb IIIC T85°C Db IP66 (Tamb = -50°C to + 58°C)
II 2 GD Ex db op is IIC T5 Gb or II 2 GD Ex db e op is IIC T5 Gb
Ex op is tb IIIC T100°C Db IP66 (Tamb = -50°C to + 70°C)
EN60079-0: 2012 + A11:2013, EN60079-1:2014
EN60079-7: 2007, EN60079-28: 2007,
EN60079-31:2014, IEC60079-0: 6
IEC 60079-1 7
th
IEC 60079-7: 4
IEC 60079-28:2006
Model G-LED Global Series LED Beacon
II 2 G D
Ed.,
Ed., IEC60079-31: 2
th
Ed.,
th
Ed,
st