AR AWSBT10 Instrucciones página 3

Single-Speaker Setup
1 Set the Left-Mono-Right
switch to Mono.
Speaker back
Note: Even though this speaker comes from the
factory charged, it's a good idea to recharge
it fully before using it for an extended period
of time. See page 7 for info on recharging the
speaker.
3 Enable Bluetooth on your device (if it isn't already on).
4
Select AR Speaker
The speaker gives an audio signal when it's finished connecting to your
smartphone. The
2
Notes:
Make sure the Status light on the front of the speaker is blinking
blue. (If it isn't, press and hold the Pair button on top of the
speaker until the speaker gives an audio signal.)
If you've previously paired a different Bluetooth device with this
speaker, the speaker will automatically attempt to reconnect to
that device when you switch the speaker on. If you want to pair to a
new device, press and hold the Pair button on the speaker until the
speaker gives an audio signal.
from the list of Bluetooth devices available.
Speaker front
Status
Solid blue
Status
light on the front of the speaker turns solid blue.
Status
Press the button on top of
the speaker to turn it on.
Speaker front
Blinking blue
Status
The Status light on the front of
the speaker blinks blue.
Notes: If you don't see AR Speaker
in the list of Bluetooth devices on
your phone, choose "Scan" from your
phone's Bluetooth menu.
The process of enabling Bluetooth
and connecting varies from device
to device. See your device's owners
manual for more information and
specific instructions.
Continues on the next page...
Status
3