Troubleshooting; Alarm Codes - Magic Chef MCSTCW16W3 Manual Del Usuario

TROUBLESHOOTING

ALARM CODES

Problem
Water Hose Alarm
Open Lid Alarm
Imbalance Alarm
Drain Alarm
Overflow Alarm
Door Lock Alarm (MCSTCW21S3
and MCSTCW21W3 only)
NOTE:
• Overflow alarm: Water drain valve remains open until manual intervention (shutoff).
• Once the alarm stops, the washer returns to its previous status prior to the alarm indication.
• Code E6: Unplug the power cord to open the lid. If the door is open, press the Power button.
When the washing machine needs servicing, contact our customer service department, and a representative will
try to diagnose the issue. DO NOT dismantle the washing machine without prior permission. Doing so will void
your warranty.
If the washing machine fails to operate properly, or it sounds an alarm, check the following guidelines for possible
solutions to common problems or alarm indicators.
LIST OF PROBLEMS AND POSSIBLE SOLUTIONS
Problems
Water Fails to Flow In
Washing Machine Fails to Run
Cause of Problem
Failure to reach preset water level
after filling for approx. 16 minutes.
Opening the lid while the washer
is running or after starting the
delay function.
Washing machine imbalance
checked 3 times.
Failure to finish draining after 4
minutes.
Water inlet hose.
Door Failed to properly lock or
unlock
• The power is off or the fuse has burned out.
• Water supply is off or has low pressure.
• Inlet hose and water tap is connected and open.
• Inlet valve filter is blocked by dirt buildup.
• Coil of inlet valve is damaged.
• Program is paused.
• The power is off or the fuse has burned out.
• The power supply voltage is too low.
• Water needs to reach required water level.
• The DELAY function is activated.
Code
E1
Other lights
are off.
E2
Other lights
are off.
E3
Other lights
are off.
E4
Other lights
are off.
E5
Other lights
are off.
E6
Other lights
are off.
Check the Following
18
Alarm Sound Stopping Alarm
Open lid to
Buzzer for 10
fix fault, then
seconds every
close to stop
16 minutes.
alarm.