Manuales relacionados para SANUS VuePoint FLF215
Resumen de contenidos para SANUS VuePoint FLF215
- Página 1 FLF215 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/1116...
- Página 2 IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! Does your TV weigh more than 100 lbs. (45.3 kg) including accessories? No — Perfect! 100 lbs.
- Página 3 Dimensions NOTE: TV shifts 3.05 in. (77.6 mm) to the right or left when in the home position. Consider this when selecting the location of your wall mount. 3.05 [77.6] OFFSET...
- Página 4 STEP 1 Attach Bracket to TV WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 5 1-1 Measure Your TV Hole Pattern Measure the width and height of your TV hole pattern in cm. Record your measurements: Width __________cm x Height ________ cm 75 mm = 7.5 cm ≈ 3 in. 100 mm = 10 cm ≈ 4 in. 200 mm = 20 cm ≈...
- Página 6 1-2 Assemble Your TV Bracket 400 x 400 Determine which TV bracket configuration to use, A, B, C, or D 15.75 [mm] based on your TV hole pattern measurements. [400] 11.81 [300] 7.87 15.75 [200] [mm] 3.94 [400] 75 x 75 [100] 100 x 100 11.81...
- Página 7 600 x 400 400 x 200 23.62 15.75 [600] [400] 7.87 [200] 15.75 [400] 7.87 [200] 15.75 200 x 400 [400] [mm] [mm] Assemble TV bracket extenders onto TV bracket as illustrated. Assemble TV bracket extenders onto TV bracket as illustrated. Secure using eight screws in the corner holes shown.
- Página 8 1-3 Select TV Screw Diameter 1-4 Select TV Screw Length Standard configurations are shown. For special If your TV has a flat back AND you want your TV closer to the applications, or if you Hand thread screws into the threaded inserts wall, use the shorter screws.
- Página 9 1-5 Attach TV Bracket Position your TV bracket configuration (A, B, C, or D) over your TV hole pattern - making sure the bracket is centered over the TV hole pattern and level. Secure bracket using your screw/washer (Flat Back) or spacer/screw/washer (Round Back / Extra Space) selection. IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
- Página 10 Wall Plate Template Wall Plate Lag Bolts WELCOME AND THANKS FOR CHOOSING SANUS VUEPOINT GET STARTED THIS IS YOUR DRILLING YOU’RE REALLY GOING 5⁄16 in. x 2 3⁄ 4 in.
- Página 11 STEP 2A Attach Wall Plate - Wood Stud CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) Locate your stud.
- Página 12 Remove the wall plate template and drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Install wall plate assembly using two lag bolts and two washers...
- Página 13 STEP 2B Attach Wall Plate - Solid Concrete / Concrete Block CAUTION: Avoid potential personal injuries and property damage! ● Mount the wall plate assembly directly onto the concrete surface ● Minimum solid concrete thickness: 8 in. (203 mm) ● Minimum concrete block size: 8 x 8 x 16 in.
- Página 14 Concrete Installation Kit CMK1 is not included (see page 10) Contact Customer Service Insert three anchors C3 (Fischer UX 10 x 60 - included in the Concrete Installation Kit*). at 1-888-333-9952 to have the additional CAUTION: Be sure the anchors C3 are seated flush with the concrete surface. hardware shipped directly to you.
- Página 15 STEP 3 Hang TV onto Wall Plate STEP 3 Parts and Hardware HEAVY! You may need assistance with this step. Fold first section of the arm of wall plate assembly against the wall to provide stability. Locking Screw 1/4-20 x 3/4 in.
- Página 16 Hang the TV onto the arm of wall plate assembly by first hooking the top support, then resting the TV into place. Lock the TV to the wall plate assembly with locking screw IMPORTANT: This locking screw must be installed to secure the TV onto the wall plate assembly Note: Note: Arrow...
- Página 17 Manage Cables Cable Ties Cables can be routed through the cable channels on the top and bottom of the arms of the wall plate assembly for a cleaner look. Route top cables through the open area of the arm as shown to prevent pinching the cable when folding the arm. Hook and loop ties can be used to bundle the cables.
- Página 18 TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT Your TV should adjust easily when moved, then stay in place. To adjust the leveling of your TV, loosen the locking screw , level your TV, then tighten locking screw If your TV is too loose or too tight, adjust the tilt tension knob by hand. IMPORTANT: This locking screw must be installed to secure NOTE: Once your TV is in place, tighten the tilt tension knob to...
- Página 19 REMOVING THE TV HEAVY! You may need assistance with this step. To remove your TV from the wall plate assembly , disconnect all cables and then reverse the procedures in STEP 3.
- Página 20 Features 23.62 Fully articulating arm, with Adjustments allow fi ngertip control 600.0 3 pivot points, creates of TV or restriction of TV movement 15.75 optimal viewing positions 400.0 7.87 200.0 3.94 100.0 2.95 75.0 11º 2.95 3.94 7.87 15.75 75.0 100.0 200.0 400.0...
- Página 21 Accessories Screen Cleaning Kit Surge Protector Hook and Loop Cable Ties 10 ft HDMI Cable...
- Página 22 Directions - Screen Cleaning Gel The Screen Cleaning Gel is ammonia and alcohol-free. Use the Screen Cleaning Gel with the micro-fiber cloth to remove fingerprints and smudges from the screen. Turn off TV. Shake gel well then spray gel sparingly onto screen. Wipe screen with the micro-fiber cloth.
- Página 23 CAUTION! : Avoid potential personal injuries and property damage! • To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors! • The input plug of this power tap is intended to serve as the disconnect device, it shall be easily accessible and withdrawn. •...
-
Página 24: Listo Para Comenzar
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este soporte sea el ideal para sus necesidades. ¿Su televisor pesa más de 45.3 kg (100 libras), incluidos los accesorios? No —... -
Página 25: Piezas Y Accesorios Suministrados
ESPAÑOL Piezas y accesorios suministrados ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;... -
Página 26: Seleccione El Diámetro De Los Tornillos Para El Televisor
ESPAÑOL 1-3 Seleccione el diámetro de los 1-4 Seleccione el largo de los tornillos tornillos para el televisor para el televisor Enrosque manualmente los tornillos en los Si el dorso del televisor es plano, utilice los PRECAUCIÓN: tornillos cortos. encastres roscados del dorso del televisor a Verifique que el tornillo o la combinación fin de determinar qué... -
Página 27: Paso 2B Fijar La Placa Mural - Hormigón Sólido O Bloques De Cemento
ESPAÑOL Instale el módulo de la placa mural usando dos tornillos tirafondo y dos arandelas . Ajuste los tornillos tirafondo solamente hasta que queden firmes contra la placa mural. PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos. NO ajuste en exceso los tornillos tirafondo. PASO 2B Fijar la placa mural - Hormigón sólido o bloques de cemento PRECAUCIÓN: Evite lesiones y daños materiales. -
Página 28: Paso 3 Colgar El Televisor En La Placa Mural
ESPAÑOL PASO 3 Colgar el televisor en la placa mural ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. Pliegue la primera sección del brazo del módulo de la placa mural contra la pared para dar mayor estabilidad. Para colgar el televisor en el brazo del módulo de la placa mural , primero enganche el soporte superior y luego apoye el televisor en su lugar. -
Página 29: Ajustes Del Televisor
ESPAÑOL Ajustes del televisor AJUSTE DE LA INCLINACIÓN AJUSTE DEL NIVEL El televisor debe acomodarse fácilmente al moverlo, y luego Para ajustar la nivelación de su televisor, afloje el tornillo de quedar en su lugar. seguridad , nivele el televisor, y luego ajuste el tornillo de seguridad Si el televisor está... -
Página 30: Descripción
ESPAÑOL Descripción 23.62 El brazo completamente articulado crea un Los ajustes permiten 600.0 movimiento de 3 puntos para alcanzar una el control manual 15.75 posición de visualización óptima. o la restricción del 400.0 movimiento del televisor. 7.87 200.0 3.94 100.0 2.95 75.0 11º... -
Página 31: Direcciones - Pantalla Gel De Limpieza
ESPAÑOL Accesorios Direcciones - Pantalla Gel de Limpieza La pantalla de Gel de limpieza es amoníaco y sin alcohol. Utilice la pantalla de Gel de limpieza con el paño de microfibra para eliminar las huellas dactilares y las manchas de la pantalla. - Página 32 Thank you for choosing Sanus VuePoint! Please take a moment to let us know how we did: Call us: 1-888-333-9952 Email us: info@sanus.com UK: 0800 056 2853 Leave a review: vuepoint.sanus.com Find us on Facebook: SANUS Follow us on Twitter @sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.