Tabla de contenido
Publicidad
CAUTION!
: Avoid potential personal injuries and property damage!
•
To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors!
•
The input plug of this power tap is intended to serve as the disconnect device, it shall be easily accessible and withdrawn.
•
This power center does not contain internal circuit breaker protection. INSTALLER MUST ensure that the input of this power center is connected
individually to an electrical service panel that is protected with a UL Listed 20A
•
(Maximum) circuit breaker for overload protection of the power center.
•
Not for use with ground-fault circuit-interrupter receptacles or receptacles with indicator lights or controls.
•
To reduce the risk of fire or electric shock, do not use this device with a receptacle in which the slot openings to not align with the blades.
•
All accessories must be grounded.
•
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this
concern.
•
Do not use this product for any purpose not explicitly specified by manufacturer.
•
If you do not understand these instructions, or have doubts about the safety of the installation,
assembly or use of this product, contact Customer Service or call a qualified contractor.
•
Do not disassemble the surge protector. Disassembling will void the warranty and may cause
serious personal injury.
•
Disconnect the surge protector during lightning storms.
•
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
23
Publicidad
Tabla de contenido
