Grundig ELYA Manual De Instrucciones página 125

LU EN final.fm Page 10 Lundi, 19. octobre 2009 2:44 14
Press and hold key during edit mode to inset the pause. The display shows an ''P''.
6. Using the Multi-Handset capabilities
These functions are used for handset management when two or more handsets are registered
on the same base.
6.1.
Intercom Call/Intercom
1. Make sure your handset is on standby mode.
2. Press the key on the handset.
- If your installation has two handsets, the second handset is directly called, and "intercom"
followed by the handset number are displayed on the screen.
- The display shows the INT icon and the number of all registered handsets
- Enter the desired handset number or press the
registered handsets are ringing.
3. On the called handset, press the
6.2.
Answering an internal call
1. The ring melody from an internal call is different from an external call. "intercom " and the
calling handset number appear on the screen. " " is blinking.
2. Press the key to answer. The " " stop blinking.
3. Ending an internal call press the
6.3.
Call management
6.3.1. An external and an internal call
Transfering an external call to another handset registred on same base
1. During a call, press . The external user is put on hold.
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the key to transfer the call.
To switch from one call to another, press and hold down the
Note!
signal is heard.
Note!
If the called handset does not answer, press
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. All users can
talk and listen simultaneously:
1. Press key. The external user is put on hold.
2. the internal call number. Wait until the internal user answers.
3. Press and hold key, until an aural signal is heard to start a three-way conference.
"conference" is displayed on the handset screen.
6.3.2. Two outside calls
Taking a second call while you are already on line
During a call, a beep is emitted by your operator to inform you that a second call is on hold. A
screen displays the number of this second caller on hold.
Press then the key to take back this new call.
key if you want to call all handsets. All
key to answer.
key.
key until an aural
to take back the call.
- 10 -
English