Causes Of Poor Reception; Troubleshooting Tips - Grundig ELYA Manual De Instrucciones

LU EN final.fm Page 17 Lundi, 19. octobre 2009 2:44 14
ELYA
- Avoid dropping and other rough treatment to the phone.
- Clean with a soft cloth.
- Never use a strong cleaning agent or abrasive powder because this will damage the
finish.
- Retain the original packaging in case you need to ship the phone at a later date.
13. Troubleshooting
13.1.

Causes of poor reception

Aluminium siding.
Foil backing on insulation.
Heating ducts and other metal construction can shield radio signals.
You are too close to appliances such as microwaves, stoves, computers, etc.
Atmospheric conditions, such as strong storms.
Base installed in the basement or lower floor of the house.
Base is plugged into an AC outlet with other electronic devices.
Baby monitor is using the same frequency.
Handset batteries is low.
You are out of range of the base.
13.2.

Troubleshooting tips

13.2.1. Caller id
Problem
No display
Solution
Are batteries fully charged? Try replacing
the batteries. Make sure the batteries are
properly installed and connected.
If you are using AC power, make sure
that the unit is connected to a non-
switched electrical outlet. Disconnect the
unit from the plug and plug it in again.
Did you order Caller ID service from your
local telephone company?
- 17 -