Display Of The Camera(S); Setting The Sound Level - Extel WESV 82500 Instrucciones De Uso E Instalación

d. Display of the camera or the cameras
To view one or several cameras (if you have installed additional cameras), press the key
the monitor or of the remote control unit.
Caution, in the case of several cameras, you should make sure that they are parameterized
in view in the menu.
To do so, press the key
meras are set on "ON" Example: "CAM1 ON".
To modify it, select the channel with the key q and modify the state with the keys t and u.
The cameras in "OFF" position will not be visible during the manual or automatic scrolling.
The number in the left upper corner of the screen indicates the selected camera.
Press again the same button to scroll the other cameras.
e. Setting the sound level
Press the key of the monitor or the remote control unit, a menu appears:
10GB
of the monitor, and make sure that the channels of the saved ca-
Audio Vol 10
Scan Time OFF
CAM1 ON
CAM2 ON
CAM3 ON
CAM4 ON
Pair CAM 1 2 3 4
Systern Setup
Factory Reset
CFI EXTEL WESV 82500 - 06/2009 - V1
Audio Vol 10
Scan Time OFF
CAM1 ON
CAM2 ON
CAM3 ON
CAM4 ON
Pair CAM 1 2 3 4
Systern Setup
Factory Reset
Raise or lower the sound volume with
the keys t and u of the monitor or the
remote control unit.
of