Mi-T-M WORK PRO Manual Del Usuario página 17

SYMPTOM
Air leaks at pump.
Air blowing from Air Intake
Filter.
Moisture in discharge air.
Excessive oil consumption or oil
in hose.
Oil has milky appearance.
Work Pro Gasoline Air Compressor Manual
TROUBLESHOOTING
PROBABLE CAUSE
Defective gaskets.
Defective inlet (reed) valve.
Condensation in air tank caused by
high level of atmospheric humidity
or air compressor is not run long
enough.
Restricted Air Intake Filter.
Air compressor on unlevel surface.
Crankcase overfilled with oil.
Wrong viscosity.
Plugged oil dipstick vent.
Plugged crankcase breather.
Oil leaks.
Worn piston rings or scored cylin-
der.
Water in oil due to condensation.
REMEDY
Torque head bolts: Single Stage= 17
ft./lbs. Two Stage= 33 ft./lbs.
Contact Mi-T-M Customer Service.
Run air compressor a minimum of
one hour to prevent condensation
buildup. Drain air tank after every
use. Drain air tank more often in hu-
mid weather and use an air line filter.
Clean or replace.
Do not incline the air compressor
more than 10° in any direction while
running.
Drain oil. Refill to proper level with
SAE-30W non-detergent oil.
Drain oil. Refill to proper level with
SAE-30W non-detergent oil.
Clean.
Clean or replace.
Torque head bolts: Single Stage=
17 ft./lbs. Two Stage= 33 ft./lbs.
Contact Mi-T-M Customer Service.
Change oil and move air compressor
to a less humid environment.
17