.- In case the swimming pool is not working (end of season, repairs, etc.) the PW Basic will be switched off and the pH
electrode and Chlorine cell will be taken out from the chlorine chamber. The pH probe and the chlorine cell must be cleaned with water,
putting in the extremes their plastic protectors and keeping them in their boxes. The holes where the pH electrode and the Chlorine cell
were placed, will be closed with two plastic lids to avoid getting dirty. Protect the PW Basic equipment from the dirt and the humidity.
12. DRAWS INORGANIC CHLORINE CELL (CHLORINE SENSOR)
12.a Parts of the chlorine sensor
12.b Changes electrolyte and membrane
13
Ref: PW Basic-16647-16648-v2-gb-T01