Get Started - Home Skinovations Silk'n FaceTite H2120 Manual Del Usuario

7. Get started!

1. Make sure that your skin is clean and dry, and that you
EN
have removed all jewellery.
2. Remove the device and the other components from the
box.
Remove the protective film that covers the electrodes (#2).
3.
4. Decide if you want to use the device cordlessly or via the
mains supply.
y
y
Start the device: Long press the control
5.
button
automatically, and 1 energy level indicator light
(#3) will turn on.
Check that the expiry date of the gel has not passed.
Z
6. Apply a thin layer of Silk'n Slider Gel over the treatment
surface (#1).
Silk'n Slider Gel (or any other water-based clear gel)
Z
facilitates smooth movement of the treatment surface
over the skin and enables conductivity. To ensure safe and
efficient treatment, always start by applying Silk'n Slider
Gel, and apply more gel if needed.
7. Using energy level 1, place the device on the area you want
to treat. Make sure that it is in full contact with the skin. You
will feel a mild sensation of warmth.
Cordless: Check that the battery is not low before you
start a treatment.
Mains supply: Place the wall adapter cable (#7) into
the wall adapter socket (#6) and connect to the mains
supply.
#4). The device starts at energy level 1
(
14