Storage Conditions; Electromagnetic Fields (Emf); Technical Information - Philips AVENT SCF397 Manual Del Usuario

English
22

Storage conditions

Keep the breast pump out of direct sunlight as prolonged exposure may cause discoloration. Store
the breast pump and its accessories in a safe, clean and dry place.
If the device has been stored in a hot or cold environment, place it in an environment with a
temperature of 20 °C (68 °F) for 30 minutes to let it reach a temperature within the usage conditions
(5 °C to 40 °C / 41 °F to 104 °F) before you use it.

Electromagnetic fields (EMF)

This Philips device complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.

Technical information

Vacuum level
Cycle speed
Motor unit rated input
Mains adapter rated input External mains adapter 100-240 V
Mains adapter rated
output
Operating conditions
Storage and
transportation conditions
Operating pressure
Net weight
External dimensions
Device classification
Materials
Service life
Mode of operation
Single breast pump
-60 to -360 mbar
53-120 cycles/min.
5 V d.c. / 1.1 A
a.c. / 50-60 Hz
5 V d.c. / 1.1 A
Temperature 5 °C to 40 °C (41 °F
to 104 °F)
Relative humidity 15 to 90% (non-
condensing)
Temperature -25 °C to +70 °C
(-13 °F to 158 °F)
Relative humidity up to 90% (non-
condensing)
700 - 1060 hPa (<3000m altitude) 700 - 1060 hPa (<3000m altitude)
230g
Motor unit: 145 mm x 95 mm x 45
mm (LxWxH)
IEC 60335-1: System: Class II;
motor unit: Class III Construction
ABS, Silicone (motor unit)
Polypropylene, Silicone (other
parts)
500 hours
continuous operation
Double breast pump
-60 to -360 mbar
53-120 cycles/min.
5 V d.c. / 1.8 A
External mains adapter 100-240 V
a.c. / 50-60 Hz
5 V d.c. / 1.8 A
Temperature 5 °C to 40 °C (41 °F to
104 °F)
Relative humidity 15 to 90% (non-
condensing)
Temperature -25 °C to +70 °C
(-13 °F to 158 °F)
Relative humidity up to 90% (non-
condensing)
310g
Motor unit: 145 mm x 95 mm x 45
mm (LxWxH)
IEC 60335-1: System: Class II; motor
unit: Class III Construction
ABS, Silicone (motor unit)
Polypropylene, Silicone (other
parts)
500 hours
continuous operation