Cleaning After Each Use - Omron COMPAir XLT NE-C25 Manual De Instrucciones

Following the cleaning instructions after each use will prevent any remaining
medication in the bottle from drying resulting in the device
not nebulizing effectively.
Rinse the nebulizer and the mask or mouthpiece with hot tap water
after each use.
1. Remove the mouthpiece or mask from the nebulizer.
2. Disconnect the air tubing from the nebulizer.
3. Gently twist and pull the nebulizer to separate the nebulizer into two sections.
4. Remove the funnel from the bottom section of the nebulizer.
5. Rinse both sections of the nebulizer, mouthpiece or mask, and funnel
with hot tap water.
6. Dry with clean paper towels or allow the parts to air dry in
a clean environment.
7. Assemble the device. Put the parts in a dry, sealed bag and place in the
storage pocket of the carrying bag.

CLEANING AFTER EACH USE

8