Diagnostic System - Robot Coupe BLIXER 8 Manual De Instruccion

DIAGNOSTIC SYSTEM

R E M E M B E R
The control system requires the lid be opened and
closed, once after switching your appliance on.
This sequence will check the correct operation of
the lid arm safety switch. At this stage, if all the
conditions are met for operation, the light will
stop flashing and stay on.
- no light: see paragraph 1.
- flashing light: see paragraph 2.
- steady light
R E M E M B E R
Always switch your machine off before carrying
out any cleaning or maintenance.
All repair and maintenance work must be
carried out by a qualified technician.
1) No light
10
replaced.
2) Flashing light
first and start the test afresh.
procedure.
Each of the 4 columns corresponds to one of the 4
buttons I and II
buttons I and II
pressed a further time.
it indicates the actual status of the corresponding
button I
test button II and then test button T).
button O
Press buttons I and II
speed of the indicator light.
buttons I, II, T and O allow to test the
presence sensors of the lid, the base and the bowl,
and button O
Press buttons I and II
of the indicator light.
buttons I, II, T and O allow to test the
Press buttons I and II
first the button's contact block operation and its
wiring.
-