Publicidad
4
Assembly order
The drawing on page 5 in the system folder shows the recommended assembly order. Start by assembling the part
referred to as "Step 1", then "Step 2" and "Step 3", etc. To begin with only assemble the things shown on the drawing
and check that they are positioned correctly in relation to each other.
Be aware of the places where "options" may be indicated on the poles: e.g. A, B or C on the drawing. An option refers
to a section of the detailed instructions indicating a speciic assembly order.
The detailed instructions can be found in the instruction book. Once the speciied steps have been completed and
checked for correct positioning, assemble the remaining parts of the system, e.g. triangular plates, rocking tubes,
ladders, ropes, etc.
Check that all parts have been assembled correctly before illing the foundations with concrete and soil.
A900266-06
10x40 MB
1
210040
710000
Copyright©KOMPAN A/S
2
10x30 BH
3
601030
A801055-06
Option A
A900266-06
1
2
10x40 MB
210040
710000
10x30 BH
601030
A801055-06
3
3/6
Option B
A900266-06
2
10x40 MB
1
210040
710000
10x30 BH
601030
A801055-06
Copyright©KOMPAN A/S
3/05
3
Publicidad
