PEERLESS SGLS01 Manual De Instalación página 9

Mounting and Removing Flat Panel Screen
Hook adapter brackets (G) onto universal plate (F), then slowly swing screen in as shown. Turn screws clockwise at
14
least six times to prevent screen from being removed as shown in detail 4.
Note: Tighten using 4 mm allen wrench (R).
Screen can be adjusted horizontally if desired.
Note: It is important to lock screen down! To lock the screen down, tighten screws to adapter bracket as shown in
detail 4.
To remove screen from mount, loosen screws, swing screen away from mount, and lift screen off of mount.
WARNING
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
F
F
SCREWS
G
G
DETAIL 4
9 of 30 ISSUED: 07-28-06 SHEET #: 202-9156-4 11-20-06