TP-Link TL-WA5210G Manual Del Usuario página 17

The connection will be similar to the figure below after the above
steps are finished.
If you use two CPEs to
build the
please make sure that
the two CPEs
placed face to face.
Turn on all your network devices and then check to see if the LEDs
on the AP display normally as the diagram below describes.
Solid light
Solid light or flashing
Solid light
If the LEDs display abnormally, please check to see if all the
Note
cable connectors (power adapter and Ethernet cable) are well
connected to your devices.
network,
are
15