1
External Antenna Connection
1. If you have an external antenna with the RP-SMA port, you could
connect it to the RP-SMA port of your CPE directly.
2. If you have an external antenna with N type port, you could connect it
to the TL-WA5210G with a pigtail cable. To protect your product, you
could also add a surge protector. The complete connection would be
simply illustrated as below.
The pigtail cable is used to change the N type port to RP-SMA
Note
type port.
2
Configure the External Antenna
You will need to assign your computer a Static IP address within
Note
the same range as the AP's IP address. See the Appendix 2:
Troubleshooting - T3 if you need assistance.
Appendix 1: External
Antenna Installation
18