Safety Instructions - Zinwell ZAT-970A Manual Del Usuario

Ocultar thumbs Ver también para ZAT-970A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Please review the following safety precautions. If this is the first time using this model of terrestrial TV
receiver, then read this manual before installing or using the receiver. If the receiver is not functioning
properly, please contact your local distributor or system installer.
The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage
inside the receiver that may be sufficient to constitute a risk of electric shock to anyone opening
the case. It is also used to indicate improper installation or handling of the receiver that could
damage the electrical system in the receiver or in other equipment attached to the receiver.
The exclamation point in the triangle is used to alert you to important operating and maintenance
instructions. Failure to follow these instructions could result in injury to you or damage to the
receiver.
Be careful with electricity:
Power outlet: To prevent electric shock, be sure the electrical plug used on the receiver's power cord matches
the electrical outlet used to supply power to the receiver.
Power cord: Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items.
Power overloading: Avoid overloading electrical outlets or extension cords which otherwise could result in
electric shock or fire.
Lightning: For protection from lightning or when the receiver is left unattended for a long period, disconnect it
from the power source.
Protect other equipment: Unplug the receiver before connecting any other equipment, especially the TV
antenna. Connect all equipment to the receiver before plugging in any power cords to the power source.
Power line: Be sure your TV antenna is not located near overhead power lines, or where it might fall into any
power lines. Also be careful to avoid touching any such power lines when installing the TV antenna.
Antenna Grounding: Be sure that the antenna is grounded to provide protection from lightning and build-up of
static electricity. By the way, be sure that the power has been truned off before connect to all of connectors in
particular RF IN / RF OUT.
Also follow these precautions:
Ventilation: Do not block the ventilation slots on the receiver or place any heavy object on top of it.
Blocking the air flow could damage the receiver. Arrange components so that air can flow freely around the
receiver. Ensure that there is adequate ventilation if the receiver is placed in a stand. Put the receiver in a
properly ventilated area, away from direct sunlight or any source of heat.
Overheating: Avoid stacking the receiver on top of a hot component such as a power amplifier.
Risk of Fire: Do not place the receiver on top of any easily combustible material, such as carpet or fabric.
Proper Connections: Be sure all cables and equipment are connected to the receiver as described in this
manual.
Object Entry: To avoid electric shock, never stick anything in the slots on the case or remove the cover.
Water Exposure: To reduce the risk of fire or electric shock, do not expose the receiver to rain or moisture.
Keep the tuner out of the reach of children or it may fall, causing injury or damage to the tuner.
Always disconnect the power cord from the power outlet when you are not using the tuner. This reduces your
risk of electric shocks or fire.
Always turn off the tuner, disconnect it from the power outlet, and unplug all other cables from before moving
the tuner. This reduces your risk of electric shocks or fire.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interferences received, including interference that may cause undesired
operation.
EMI (Electro Magnetic Interference) tested
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.

SAFETY INSTRUCTIONS

WARNING!
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT REMOVE THE COVER
NO USER-SERVICEABLE PARTS ARE INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido