Basic Operation; Welcome Page; Channel - Zinwell ZAT-970A Manual Del Usuario

Precautions
Replace batteries in pairs. Do not mix battery types (such as zinc carbon with alkaline).
Does not recharge, heat, short circuit, disassemble, or burn batteries.
Button
Press to turn ON and OFF
POWER
Press to turn off the audio output
MUTE
Press to call up the CC, CS and Text.
CC/CS
Press to display the "Favorite" Channel groups or All Channel.
FAVORITE
Press to display I-Plate providing information about the current channel.
DISPLAY
Press to enter channel number or password
Numeric Buttons
Press to return to the previous channel you viewed.
RECALL
－
For digital channel number, like "10-02".
Press to back to the previous menu page
EXIT
Press to activate or leave the On-Screen Menu
MENU
Press to make channel up and down functions.
CH+/CH-
Press to increase or decrease audio volume.
VOL+/VOL-
Select to highlight a desired item on the screen.
Press to enter a highlighted menu or sub-menu item or to pop up TV
ENTER
channel list.
Press to select Multi-language
AUDIO
Press to adjust the aspect ratio modes.
ZOOM

BASIC OPERATION

1. Make sure the physical connection is properly connected.
2. Turn on the TV.
3. Select the appropriate external video input on your TV by using the TV remote control.
4. Make sure the receiver is already in power-on mode. If it is in off mode (i.e. front panel LED screen
shows RED), turn on the receiver by pressing the "POWER" button on the front panel of the receiver
or on the remote control.
5. Press the "MENU" button to see the Menu banner.

Welcome page

Before you use any of the channel buttons (CH +/-), the available channels must first be scanned and
memorized.

Channel

Initial Screen
The first time the receiver is powered up, you see the
initial welcome menu page.
Use the arrow keys
OSD Language and Time Zone.
Move highlight to OK button and press ENTER key to
begin to auto scan channels automatically.
1. TV Channel List
Through the channel menu, users can implement the
program management mechanism as below:
Description
to move the highlight through
3
3