Digital Display - Hoover DWOL Manual Del Usuario

Memorize a new programme when M1 &
M2 already have programmes saved:
1) Set the programme and the options
you want.
2) Press the FAVOURITES button for
about 3 seconds
combination in the position M1. The
pre-existing saved programme in M1
will move in the position M2.
Start a program
memorized:
l
Press briefly the FAVOURITES button
(once for M1, twice for M2) and press the
START/PAUSE button.
l
Once you recall a memorized program,
you can still change its options and
settings, pressing
keys. In this case, the added options
won't be memorized.
If you accidently select a memorized
program, simply turn the program
knob to select another one.
NIGHT & DAY button
l
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
l
During the phase in which the water is
held in the tub, the relevant indicator light
blink to show that the machine is at a
standstill.
l
Deselect the option to end the cycle with
a spin dry (which may be reduced or
cancelled using the appropriate button)
and emptying phase.
to save the
that is already
the corresponding
l
Thanks to electronic control, the water in
the intermediate
silently, making this option very useful for
washing at night.
KEY LOCK
l
Pressing simultaneously
NIGHT & DAY and DELAY START for
about 3 seconds, the machine allows
you to lock the keys. In this way, you can
avoid making accidental or unwanted
changes if a button on the display is
pressed accidently during a cycle.
l
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or by turning the programme knob
to OFF.

Digital Display

The display's indicator system allows you to
be constantly informed about the status of
the machine.
1 15
3
2
7 7 7
13 14
1) DOOR LOCKED INDICATOR LIGHT
l
The indicator light is illuminated when the
door is fully closed.
Close the door BEFORE selecting the
START/PAUSE button.
l
When START/PAUSE
the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
62
phases is emptied
the buttons
6 10 12 5
7
8 9 11
is pressed on
7
4